Show Dot1X - Cisco Catalyst 2960 Command Reference Manual

Hide thumbs Also See for Catalyst 2960:

Table of Contents

Chapter 2 Catalyst 2960 Switch Cisco IOS Commands

show dot1x

Use the show dot1x user EXEC command to display IEEE 802.1x statistics, administrative status, and

operational status for the switch or for the specified port.

Syntax Description

all [summary]

interface interface-id

Command Modes

Command History

Usage Guidelines

If you do not specify a port, global parameters and a summary appear. If you specify a port, details for

that port appear.

If the port control is configured as unidirectional or bidirectional control and this setting conflicts with

the switch configuration, the show dot1x {all | interface interface-id} privileged EXEC command

output has this information:

ControlDirection

Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output

are not displayed, but the lines that contain Output appear.

show dot1x [{all [summary] | interface interface-id} [details | statistics]] [ | {begin | exclude |

include} expression]

(Optional) Display the IEEE 802.1x status for all ports.

(Optional) Display the IEEE 802.1x status for the specified port (including

type, module, and port number).

(Optional) Display the IEEE 802.1x interface details.

(Optional) Display IEEE 802.1x statistics for the specified port.

(Optional) Display begins with the line that matches the expression.

(Optional) Display excludes lines that match the expression.

(Optional) Display includes lines that match the specified expression.

Expression in the output to use as a reference point.

Modification

This command was introduced.

The display was expanded to include auth-fail-vlan in the authorization

state machine state and port status fields.

The command syntax was changed, and the command output was modified.

= In (Inactive)

Catalyst 2960 Switch Command Reference