Show Cluster - Cisco Catalyst 2960 Command Reference Manual
Hide thumbs
Also See for Catalyst 2960:
- Configuration manual (2288 pages) ,
- Software configuration manual (980 pages) ,
- Command reference manual (800 pages)
Table of Contents
Advertisement
show cluster
show cluster
Use the show cluster user EXEC command to display the cluster status and a summary of the cluster to
which the switch belongs. This command can be entered on the cluster command switch and cluster
member switches.
Syntax Description
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History
Release
12.2(25)FX
Usage Guidelines
If you enter this command on a switch that is not a cluster member, the error message
cluster member
On a cluster member switch, this command displays the identity of the cluster command switch, the
switch member number, and the state of its connectivity with the cluster command switch.
On a cluster command switch, this command displays the cluster name and the total number of members.
It also shows the cluster status and time since the status changed. If redundancy is enabled, it displays
the primary and secondary command-switch information.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Examples
This is an example of output when the show cluster command is entered on the active cluster command
switch:
Switch> show cluster
Command switch for cluster "Ajang"
Catalyst 2960 Switch Command Reference
2-308
show cluster [ | {begin | exclude | include} expression]
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
appears.
Total number of members:
Status:
Time since last status change:
Redundancy:
Standby command switch: Member 1
Standby Group:
Standby Group Number:
Heartbeat interval:
Heartbeat hold-time:
Extended discovery hop count:
Chapter 2 Catalyst 2960 Switch Cisco IOS Commands
7
1 members are unreachable
0 days, 0 hours, 2 minutes
Enabled
Ajang_standby
110
8
80
3
Not a management
OL-8604-04
Advertisement
Table of Contents
