Cisco Catalyst 2960 Command Reference Manual page 251

Hide thumbs Also See for Catalyst 2960:

Table of Contents

Catalyst 2960 Switch Cisco IOS Commands

This example shows how to assign the ingress bandwidths for the queues. Queue 1 is the priority queue

with 10 percent of the bandwidth allocated to it. The bandwidth ratio allocated to queues 1 and 2 is

4/(4+4). SRR services queue 1 (the priority queue) first for its configured 10 percent bandwidth. Then

SRR equally shares the remaining 90 percent of the bandwidth between queues 1 and 2 by allocating 45

percent to each queue:

Switch(config)# mls qos srr-queue input priority-queue 1 bandwidth 10

Switch(config)# mls qos srr-queue input bandwidth 4 4

You can verify your settings by entering the show mls qos interface [interface-id] queueing or the show

mls qos input-queue privileged EXEC command.

Related Commands

mls qos srr-queue input buffers

mls qos srr-queue input cos-map

mls qos srr-queue input dscp-map

mls qos srr-queue input priority-queue

mls qos srr-queue input threshold

show mls qos input-queue

show mls qos interface

Allocates the buffers between the ingress queues.

Maps class of service (CoS) values to an ingress queue or

maps CoS values to a queue and to a threshold ID.

Maps Differentiated Services Code Point (DSCP) values

to an ingress queue or maps DSCP values to a queue and

to a threshold ID.

Configures the ingress priority queue and guarantees

Assigns weighted tail-drop (WTD) threshold percentages

to an ingress queue.

Displays ingress queue settings.

Displays quality of service (QoS) information.

mls qos srr-queue input bandwidth

Catalyst 2960 Switch Command Reference