Spanning-Tree Mst Hello-Time - Cisco 3020 - Catalyst Blade Switch Command Reference Manual
Cisco catalyst blade switch 3020 for hp command reference, rel. 12.2(25)sef1
Hide thumbs
Also See for 3020 - Cisco Catalyst Blade Switch:
- Configuration manual (712 pages) ,
- Release note (54 pages) ,
- Getting started manual (37 pages)
Table of Contents
Advertisement
spanning-tree mst hello-time
spanning-tree mst hello-time
Use the spanning-tree mst hello-time global configuration command to set the interval between hello
bridge protocol data units (BPDUs) sent by root switch configuration messages. Use the no form of this
command to return to the default setting.
Syntax Description
seconds
Defaults
The default is 2 seconds.
Command Modes
Global configuration
Command History
Release
12.2(25)SEF
Usage Guidelines
After you set the spanning-tree mst max-age seconds global configuration command, if a switch does
not receive BPDUs from the root switch within the specified interval, the switch recomputes the
spanning-tree topology. The max-age setting must be greater than the hello-time setting.
Changing the spanning-tree mst hello-time command affects all spanning-tree instances.
Examples
This example shows how to set the spanning-tree hello time to 3 seconds for all multiple spanning-tree
(MST) instances:
Switch(config)# spanning-tree mst hello-time 3
You can verify your setting by entering the show spanning-tree mst privileged EXEC command.
Related Commands
Command
show spanning-tree
spanning-tree mst
forward-time
spanning-tree mst max-age
spanning-tree mst max-hops
Cisco Catalyst Blade Switch for HP Command Reference
2-458
spanning-tree mst hello-time seconds
no spanning-tree mst hello-time
Interval between hello BPDUs sent by root switch configuration messages. The
range is 1 to 10 seconds.
Modification
This command was introduced.
mst
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands
Description
Displays MST information.
Sets the forward-delay time for all MST instances.
Sets the interval between messages that the spanning tree receives
from the root switch.
Sets the number of hops in a region before the BPDU is discarded.
OL-8916-01
Advertisement
Table of Contents
