Dot1X Reauthentication - Cisco 3020 - Catalyst Blade Switch Command Reference Manual
Cisco catalyst blade switch 3020 for hp command reference, rel. 12.2(25)sef1
Hide thumbs
Also See for 3020 - Cisco Catalyst Blade Switch:
- Configuration manual (712 pages) ,
- Release note (54 pages) ,
- Getting started manual (37 pages)
Table of Contents
Advertisement
dot1x reauthentication
dot1x reauthentication
Use the dot1x reauthentication interface configuration command to enable periodic re-authentication
of the client. Use the no form of this command to return to the default setting.
Syntax Description
This command has no arguments or keywords.
Defaults
Periodic re-authentication is disabled.
Command Modes
Interface configuration
Command History
Release
12.2(25)SEF
Usage Guidelines
You configure the amount of time between periodic re-authentication attempts by using the dot1x
timeout reauth-period interface configuration command.
Examples
This example shows how to disable periodic re-authentication of the client:
Switch(config-if)# no dot1x reauthentication
This example shows how to enable periodic re-authentication and to set the number of seconds between
re-authentication attempts to 4000 seconds:
Switch(config-if)# dot1x reauthentication
Switch(config-if)# dot1x timeout reauth-period 4000
You can verify your settings by entering the show dot1x [interface interface-id] privileged EXEC
command.
Related Commands
Command
dot1x re-authenticate
dot1x timeout
show dot1x
interface-id]
Cisco Catalyst Blade Switch 3020 for HP Command Reference
2-80
dot1x reauthentication
no dot1x reauthentication
Modification
This command was introduced.
reauth-period
[interface
Chapter 2
Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands
Description
Manually initiates a re-authentication of all IEEE 802.1x-enabled
ports.
Sets the number of seconds between re-authentication attempts.
Displays IEEE 802.1x status for the specified port.
OL-8916-01
Advertisement
Table of Contents
