Interface Vlan - Cisco 3020 - Catalyst Blade Switch Command Reference Manual
Cisco catalyst blade switch 3020 for hp command reference, rel. 12.2(25)sef1
Hide thumbs
Also See for 3020 - Cisco Catalyst Blade Switch:
- Configuration manual (712 pages) ,
- Release note (54 pages) ,
- Getting started manual (37 pages)
Table of Contents
Advertisement
Chapter 2
Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands
interface vlan
Use the interface vlan global configuration command to create or access a VLAN and to enter interface
configuration mode. Use the no form of this command to delete a VLAN.
Syntax Description
vlan-id
Defaults
The default VLAN interface is VLAN 1.
Command Modes
Global configuration
Command History
Release
12.2(25)SEF
Usage Guidelines
VLANs are created the first time that you enter the interface vlan vlan-id command for a particular
VLAN. The vlan-id corresponds to the VLAN-tag associated with data frames on an ISL or IEEE 802.1Q
encapsulated trunk or the VLAN ID configured for an access port.
If you delete a VLAN by entering the no interface vlan vlan-id command, the deleted interface is no
longer visible in the output from the show interfaces privileged EXEC command.
You cannot delete the VLAN 1 interface.
Note
You can re-instate a deleted VLAN by entering the interface vlan vlan-id command for the deleted
interface. The interface comes back up, but the previous configuration is gone.
Examples
This example shows how to create a new VLAN with VLAN ID 23 and to enter interface configuration
mode:
Switch(config)# interface vlan 23
Switch(config-if)#
You can verify your setting by entering the
EXEC commands.
Related Commands
Command
show interfaces
OL-8916-01
interface vlan vlan-id
no interface vlan vlan-id
VLAN number. The range is 1 to 4094.
Modification
This command was introduced.
vlan vlan-id
show interfaces
and show interfaces vlan vlan-id privileged
Description
Displays the administrative and operational status of all
interfaces or the specified VLAN.
Cisco Catalyst Blade Switch 3020 for HP Command Reference
interface vlan
2-97
Advertisement
Table of Contents
