Interface Vlan; Interface Configuration Mode - Cisco Catalyst 3560-X Command Reference Manual

Hide thumbs Also See for Catalyst 3560-X:

Table of Contents

interface vlan

Syntax Description

Command Modes

Command History

Usage Guidelines

Catalyst 3750-X and 3560-X Switch Command Reference

Downloaded from

www.Manualslib.com

Use the interface vlan global configuration command on the switch stack or on a standalone switch to

create or access a dynamic switch virtual interface (SVI) and to enter interface configuration mode. Use

the no form of this command to delete an SVI.

interface vlan vlan-id

no interface vlan vlan-id

VLAN number. The range is 1 to 4094.

The default VLAN interface is VLAN 1.

Global configuration

Modification

This command was introduced.

SVIs are created the first time that you enter the interface vlan vlan-id command for a particular VLAN.

The vlan-id corresponds to the VLAN-tag associated with data frames on an ISL or IEEE 802.1Q

encapsulated trunk or the VLAN ID configured for an access port.

When you create an SVI, it does not become active until it is associated with a physical port.

If you delete an SVI by entering the no interface vlan vlan-id command, the deleted interface is no

longer visible in the output from the show interfaces privileged EXEC command.

You cannot delete the VLAN 1 interface.

You can re-instate a deleted SVI by entering the interface vlan vlan-id command for the deleted

interface. The interface comes back up, but the previous configuration is gone.

The interrelationship between the number of SVIs configured on a switch or a switch stack and the

number of other features being configured might have an impact on CPU utilization due to hardware

limitations. You can use the sdm prefer global configuration command to reallocate system hardware

resources based on templates and feature tables. For more information, see the

manuals search engine

Catalyst 3750-X and 3560-X Switch Cisco IOS Commands

Catalyst 3750-x