Cisco Catalyst 3560-X Command Reference Manual page 239

Hide thumbs Also See for Catalyst 3560-X:

Table of Contents

Catalyst 3750-X and 3560-X Switch Cisco IOS Commands

Related Commands

Downloaded from

www.Manualslib.com

This example shows how to enable OBFL on a Catalyst 3750-X-only switch stack and to specify that all

the hardware-related messages on stack member 4 are stored in the flash memory when this command

is entered on the stack master:

Switch(config)# hw-module module 4 logging onboard

This example shows how to enable OBFL on a standalone switch and to specify that only severity 1

hardware-related messages are stored in the flash memory of the switch:

Switch(config)# hw-module module 1 logging onboard message level 1

You can verify your settings by entering the

clear logging onboard

show logging onboard

manuals search engine

show logging onboard

Removes the OBFL data in the flash memory.

Displays OBFL information.

Catalyst 3750-X and 3560-X Switch Command Reference

onboard privileged EXEC

Catalyst 3750-x