Vtp (Interface Configuration) - Cisco Catalyst 3560-X Command Reference Manual

Hide thumbs Also See for Catalyst 3560-X:

Table of Contents

vtp (interface configuration)

Syntax Description

Command Default

Command Modes

Command History

Usage Guidelines

Related Commands

Catalyst 3750-X and 3560-X Switch Command Reference

Downloaded from

www.Manualslib.com

Use the vtp interface configuration command to enable the VLAN Trunking Protocol (VTP) on a

per-port basis. Use the no form of this command to disable VTP on the interface.

This command is supported only when the switch is running VTP version 3.

This command has no keywords or arguments.

This command has no default settings.

Interface configuration.

Modification

This command was introduced.

Enter this command only interfaces that are switchport in trunk mode.

This command is supported only on switches configured for VTP version 3.

This example shows how to enable VTP on an interface:

Switch(config-if)# vtp

This example shows how to disable VTP on an interface:

Switch(config-if)# no vtp

Globally configures VTP domain-name, password, pruning, version, and

configuration)

manuals search engine

Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands

Catalyst 3750-x