Debug Platform Ipc - Cisco Catalyst 3560-X Command Reference Manual

Hide thumbs Also See for Catalyst 3560-X:

Table of Contents

debug platform ipc

Syntax Description

Command Modes

Command History

Usage Guidelines

Related Commands

Catalyst 3750-X and 3560-X Switch Command Reference

Downloaded from

www.Manualslib.com

Use the debug platform ipc privileged EXEC command to enable debugging of the platform-dependent

Interprocess Communication (IPC) Protocol. Use the no form of this command to disable debugging.

debug platform ipc {all | init | receive | send | trace}

no debug platform {all | init | receive | send | trace}

This command is supported only on Catalyst 3750-X switches.

Display all platform IPC debug messages.

Using this command can degrade the performance of the switch.

Display debug messages related to IPC initialization.

Display IPC traces each time an IPC packet is received by the switch.

Display IPC traces each time an IPC packet is sent by the switch.

Display IPC trace debug messages, tracing the code path as the IPC functions are

Debugging is disabled.

Privileged EXEC

Modification

This command was introduced.

The undebug platform ipc command is the same as the no debug platform ipc.

When you enable debugging on a switch stack, it is enabled only on the stack master. To enable

debugging on a stack member, you can start a session from the stack master by using the session

switch-number privileged EXEC command. Then enter the debug command at the command-line

prompt of the stack member. You also can use the remote command stack-member-number LINE

privileged EXEC command on the stack master switch to enable debugging on a member switch without

first starting a session.

show debugging

Displays information about the types of debugging that are enabled.

manuals search engine

Catalyst 3750-X and 3560-X Switch Debug Commands

Catalyst 3750-x