Cisco Catalyst 3560-X Command Reference Manual page 827

Hide thumbs Also See for Catalyst 3560-X:

Table of Contents

Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands

Related Commands

Downloaded from

www.Manualslib.com

This example shows how to configure a unique SNMP community string named comaccess for traps and

prevent SNMP polling access with this string through access-list 10:

Switch(config)# snmp-server community comaccess ro 10

Switch(config)# snmp-server host 172.20.2.160 comaccess

Switch(config)# access-list 10 deny any

This example shows how to send the SNMP traps to the host specified by the name myhost.cisco.com.

The community string is defined as comaccess:

Switch(config)# snmp-server enable traps

Switch(config)# snmp-server host myhost.cisco.com comaccess snmp

This example shows how to enable the switch to send all traps to the host myhost.cisco.com by using the

community string public:

Switch(config)# snmp-server enable traps

Switch(config)# snmp-server host myhost.cisco.com public

You can verify your settings by entering the show running-config privileged EXEC command.

show running-config

snmp-server enable traps

manuals search engine

Displays the operating configuration. For syntax information, use this

link to the Cisco IOS Release 12.2 Command Reference listing page:

http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/prod_comma

nd_reference_list.html

Select the Cisco IOS Commands Master List, Release 12.2 to navigate

to the command.

Enables SNMP notification for various trap types or inform requests.

Catalyst 3750-X and 3560-X Switch Command Reference

snmp-server host

Catalyst 3750-x