Table of Contents
Advertisement
Chapter 4
Configuring Settings on the Cisco Unified IP Phone
Table 4-11
Locale Configuration Menu Options (continued)
Option
Description
Network Locale
Version of the network locale loaded on the
Version
phone.
NTP Configuration
Menu to view information on NTP server and
mode configuration. For more information, see
(SIP phones only)
NTP Configuration Menu, page
NTP Configuration Menu
The NTP Configuration menu displays information about the NTP server and mode configuration used
by the phone.
Table 4-12
NTP Configuration Menu Options
Option
Description
NTP Server 1
IP address of the primary NTP server.
NTP Server 2
IP address of the secondary or backup NTP
server.
NTP Mode 1
Primary server mode. Supported modes are
Directed Broadcast, Unicast, Multicast, Any cast.
NTP Mode 2
Secondary server mode. Supported modes are
Directed Broadcast, Unicast, Multicast, Any cast.
UI Configuration Menu
The UI Configuration menu displays the status of various user interface features on the phone.
Table 4-13
Table 4-13
UI Configuration Menu Options
Option
Description
Auto Line Select
Indicates whether the phone shifts the call focus
to incoming calls on all lines.
When this option is disabled, the phone only
shifts the call focus to incoming calls on the line
that is in use. When this option is enabled, the
phone shifts the call focus to the line with the
most recent incoming call.
Default: Disabled
BLF for Call Lists
Indicates whether the Busy Lamp Field (BLF) is
enabled for call lists.
OL-15483-01
Table 4-12
describes the options on this menu.
describes the fields in this menu.
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 7.0
To Change
Display only—cannot configure.
From Cisco Unified Communications Manager
Administration, choose System > Phone NTP
4-17.
Reference.
To Change
Use Cisco Unified Communications Manager
Administration to modify.
Use Cisco Unified Communications Manager
Administration to modify.
Use Cisco Unified Communications Manager
Administration to modify.
Display only—cannot configure.
To Change
From Cisco Unified Communications Manager
Administration, choose
Device > Phone > Phone Configuration.
From Cisco Unified Communications Manager
Administration, choose System > Enterprise
Parameters.
Device Configuration Menu
4-17
Advertisement
Table of Contents
Troubleshooting
