Table of Contents
Advertisement
Chapter 4
Configuring Settings on the Cisco Unified IP Phone
Locale Configuration Menu
The Locale Configuration menu displays information about the user locale and the network locale used
by the phone.
Table 4-12
Locale Configuration Menu Options
Option
User Locale
User Locale Version
User Locale Char Set
Network Locale
Network Locale Version Version of the network locale loaded on the
NTP Configuration (SIP
phones only)
NTP Configuration Menu for SIP Phones
The NTP Configuration menu displays information about the NTP server and mode configuration used
by SIP phones.
Table 4-13
NTP Configuration Menu Options
Option
Description
NTP IP Address 1
IP address of the primary NTP server.
NTP IP Address 2
IP address of the secondary or backup NTP
server.
OL-23092-01
Table 4-12
describes the options on this menu.
Description
User locale associated with the phone user. The
user locale identifies a set of detailed
information to support users, including
language, font, date and time formatting, and
alphanumeric keyboard text information.
For more information on installing user locale,
refer to the Cisco Unified Communications
Operating System Administration Guide.
Version of the user locale loaded on the phone.
Character set that the phone uses for the user
locale.
Network locale associated with the phone user.
The network locale identifies a set of detailed
information that supports the phone in a specific
location, including definitions of the tones and
cadences used by the phone.
phone.
Provides access to the NTP Configuration Menu.
For more information, see
Menu for SIP Phones, page
Table 4-13
describes the options on this menu.
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.5
To Change
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
Display only—Cannot configure.
Display only—Cannot configure.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
Display only—Cannot configure.
Display only—Cannot configure.
NTP Configuration
4-23.
To Change
From Cisco Unified Communications Manager
Administration, choose System > Phone NTP
Reference.
From Cisco Unified Communications Manager
Administration, choose System > Phone NTP
Reference.
Device Configuration Menu
4-23
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
