Table of Contents
Advertisement
Chapter 4
Configuring Settings on the Cisco Unified IP Phone
Table 4-16
Security Configuration Menu Options (continued)
Option
Description
GARP Enabled
Indicates whether the phone learns MAC
addresses from Gratuitous Address Resolution
Protocol (ARP) responses. Disabling the phone's
ability to accept Gratuitous ARP will prevent
applications that use this mechanism to monitor
and record voice streams from working. If voice
monitoring is not desired, set this option to No
(disabled).
Voice VLAN
Indicates whether the phone allows a device
Enabled
attached to the access port to access the Voice
VLAN. Setting this option to No (disabled)
prevents the attached PC from sending and
receiving data on the Voice VLAN. This setting
also prevents the PC from receiving data sent and
received by the phone. Set this setting to Yes
(enabled) if an application that requires
monitoring of the phone's traffic is running on the
PC. These applications include monitoring and
recording applications and network monitoring
software.
Web Access
Indicates whether web access is enabled (Yes) or
Enabled
disabled (No) for the phone.
Security Mode
Displays the security mode that is set for the
phone.
Logging Display
For use by the Cisco Technical Assistance Center (TAC), if necessary.
QoS Configuration Menu
The QoS Configuration menu displays information that relates to quality of service (QoS) for the phone.
Table 4-17
Table 4-17
QoS Configuration Menu Options
Option
Description
DSCP for Call
Differentiated Services Code Point (DSCP) IP
Control
classification for call control signaling.
DSCP for
DSCP IP classification for any phone
Configuration
configuration transfer.
DSCP for Services
DSCP IP classification for phone-based
services.
OL-15483-01
describes the options on this menu.
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 7.0
To Change
From Cisco Unified Communications Manager
Administration, choose Device > Phone > Phone
Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone > Phone
Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone > Phone
Configuration.
Use Cisco Unified Communications Manager
Administration to modify.
To Change
From Cisco Unified Communications Manager
Administration, choose System > Enterprise
Parameters.
From Cisco Unified Communications Manager
Administration, choose System > Enterprise
Parameters.
From Cisco Unified Communications Manager
Administration, choose System > Enterprise
Parameters.
Device Configuration Menu
4-23
Advertisement
Table of Contents
Troubleshooting
