Table of Contents
Advertisement
Technical Specifications
The following sections describe the technical specifications for the Cisco Unified IP Phone 7962G and
7942G.
•
•
•
Physical and Operating Environment Specifications
Table D-1
IP Phone 7962G and 7942G.
Table D-1
Physical and Operating Specifications
Specification
Operating temperature
Operating relative humidity
Storage temperature
Height
Width
Depth
Weight
Power
Cables
Distance Requirements
OL-15483-01
Physical and Operating Environment Specifications, page D-1
Cable Specifications, page D-2
Network and Access Port Pinouts, page D-2
shows the physical and operating environment specifications for the Cisco Unified
Value or Range
32° to 104°F (0° to 40°C)
10% to 95% (non-condensing)
14° to 140°F (–10° to 60°C)
8 in. (20.32 cm)
10.5 in. (26.67 cm)
6 in. (15.24 cm)
3.5 lb (1.6 kg)
100-240 VAC, 50-60 Hz, 0.5 A—when using the AC adapter
•
48 VDC, 0.2 A—when using the in-line power over the network cable
•
Category 3/5/5e for 10-Mbps cables with 4 pairs
Category 5/5e for 100-Mbps cables with 4 pairs
Cables have 4 pairs of wires for a total of 8 conductors.
Note
As supported by the Ethernet Specification, it is assumed that the maximum cable length
between each Cisco Unified IP Phone and the switch is 100 meters (330 feet).
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 7.0
A P P E N D I X
D
D-1
Advertisement
Table of Contents
Troubleshooting
