Canon MX490 series Online Manual page 153

Hide thumbs Also See for MX490 series:

Table of Contents

◦ select Photo for Document type and specify Auto scan(A) -Singl for Scan size to scan one

• Scan one printed photo, postcard, business card, or disc with a software application on a computer

Place the original WITH THE SIDE TO SCAN FACING DOWN, with 0.4 inch (1 cm) or more space

between the edges (diagonally striped area) of the platen glass. Portions placed on the diagonally striped

area cannot be scanned.

Loading Two or More Originals on the platen glass

• In the scan mode,

◦ select Auto scan for Document type to scan two or more printed photos, postcards, or business

◦ select Photo for Document type and specify Auto scan(A) -Multi for Scan size to scan two or

more originals

• Scan two or more printed photos, postcards, or business cards with a software application on a

Place the originals WITH THE SIDE TO SCAN FACING DOWN. Allow 0.4 inch (1 cm) or more space

between the edges (diagonally striped area) of the platen glass and the originals, and between the

originals. Portions placed on the diagonally striped area cannot be scanned.

You can place up to 12 items.

A: More than 0.4 inch (1 cm)

• The Skew Correction function automatically compensates for the originals placed at an angle of up to

approximately 10 degrees. Slanted photos with a long edge of 7.1 inches (180 mm) or more cannot

be corrected.

• Non-rectangular or irregular shaped photos (such as cut out photos) may not be scanned properly.

Downloaded from ManualsPrinter.com Manuals

Show Quick Links

Table of Contents

Troubleshooting