Forwarding Scanned Data To The Computer Using The Operation Panel Of The Machine - Canon MX490 series Online Manual

Hide thumbs Also See for MX490 series:

Table of Contents

Forwarding Scanned Data to the Computer Using the Operation

Panel of the Machine

Before forwarding scanned data to the computer, confirm the following:

• MP Drivers are installed.

If MP Drivers are not yet installed, install MP Drivers with the Setup CD-ROM or install them from our

• The machine is connected to a computer correctly.

Make sure that the machine is connected to the computer correctly.

Do not plug in or unplug the USB cable while the machine is in operation, or when the computer is in the

sleep or standby mode.

If you perform scanning via a network connection, make sure that all the required settings have been

Network Scan Settings

• The destination and the file name are specified in Canon IJ Scan Utility.

You can specify the destination and the file name in Canon IJ Scan Utility. For details on settings of

Canon IJ Scan Utility:

Settings Dialog Box

Follow the procedure below to forward scanned data to the computer.

Make sure that the machine is turned on.

2. Press the SCAN button.

If you forward the scanned data to a computer for the first time, the Scan menu screen is displayed. Go

If you have forwarded the scanned data to a computer, the Scan standby screen is displayed.

* The Scan standby screen for USB-connected computer

If you change the destination or scan settings, press the Menu button, then go to step 3.

Go to step 8 if you do not change the destination or scan settings.

If you forward the data to the USB-connected computer, select Local (USB).

Downloaded from ManualsPrinter.com Manuals

button to select Save to, then press the OK button.

button to select the computer to forward the scanned data, then press the OK

Show Quick Links

Table of Contents

Troubleshooting