Deleting A Print Job - Canon MX490 series Online Manual

Hide thumbs Also See for MX490 series:

Table of Contents

Deleting a Print Job

To delete a print job with AirPrint, use one of the following two methods:

• From the printer: Use the operation panel to cancel the print job.

• From an Apple device: Press the Home button on the Apple device twice to set the Multitasking

mode, and then swipe to the right. Tap the Print Center icon to display a Print Summary. Tap the

print job to be canceled, and then tap Cancel Printing.

AirPrint Troubleshooting

If the document does not print, check the following:

1. Check that the printer power is on. If the printer power is on, turn it off and then back on

again, and check whether the issue is resolved.

2. Check that the printer is connected by LAN to the same network subnet as the device on

which iOS is installed.

3. Check that the printer has enough paper and ink.

4. Check that no error message is displayed on the printer's LCD monitor.

If the problem persists, use the printer driver on your computer to execute printing and check whether

the document can be printed normally on the printer.

If the document cannot be printed, refer to the Online Manual for your model.

Downloaded from ManualsPrinter.com Manuals

Show Quick Links

Table of Contents