Canon MX490 series Online Manual page 796

Hide thumbs Also See for MX490 series:

Table of Contents

5. Perform setup with the Setup CD-ROM or perform it according to the instructions on our website.

Cannot Communicate with the Machine while It Is in the Access Point

Make sure that the machine is turned on.

Is Change LAN in LAN settings under Device settings set to LAN inactive

or Wireless LAN?

Select Access point mode.

Have you selected the machine as the destination of your external

communication devices (e.g. computers, smartphones, or tablets)?

Select the access point name (SSID) of the machine with your external communication devices.

Have you entered the proper password specified for the access point mode?

If the security setting of the access point mode is enabled, you need to enter the password to connect your

external communication device to the machine. Confirm the specified password, then enter the proper one.

Make sure that external communication devices are not placed far away from

the machine.

Locate your external communication device close enough to communicate with the machine.

Make sure that there is no obstruction.

Wireless communication between different rooms or floors is generally poor. Adjust the location of the devices.

Make sure that there is no source of radio wave interference in your vicinity.

If a device (e.g. microwave oven) using the same frequency bandwidth as the wireless station is placed

nearby, the device may cause interference. Place the wireless station as far away from the interference source

as possible.

Are you trying to connect 6 devices or more?

You can connect up to 5 devices using the access point mode.

Cannot Print, Scan, or Fax from a Computer Connected to the

Make sure that the network settings of the computer are correct.

Downloaded from ManualsPrinter.com Manuals

Show Quick Links

Table of Contents

Troubleshooting