Canon MX490 series Online Manual page 678

Hide thumbs Also See for MX490 series:

Table of Contents

• Be sure to connect the telephone line before the machine is turned on.

If you connect the telephone line when the machine is turned on, turn the machine off and unplug the

power cord. Wait for 1 minute then connect the telephone line and power plug.

• Before connecting a telephone or answering machine, remove the Telephone connector cap.

• For users in the UK:

If the connector of the external device cannot be connected to the jack on the machine, you will need

to purchase a B.T. adapter to connect as follows:

Attach the B.T. adapter to the modular cable connecting the external device, then connect the B.T.

adapter to the external device jack.

Connecting Various Lines

This section introduces how to connect various lines.

These are examples and could not be guaranteed to suit every connecting condition. For details, refer to

the instruction manual supplied with the network device (control devices such as an xDSL (Digital

Subscriber Line) modem or terminal adapter) you are connecting to this machine.

• xDSL is the generic term for the high speed digital communication technology with telephone line

such as ADSL/HDSL/SDSL/VDSL.

• Connecting to an Internet Telephone

A. Digital Subscriber Line

B. xDSL modem (splitter may not be built-in to the modem)

C. Broadband router compatible with Internet Telephone

E. Telephone or answering machine

F. WAN (Wide Area Network) port

G. LAN (Local Area Network) port

I. LINE port

* Port configurations and names may vary depending on the product.

Downloaded from ManualsPrinter.com Manuals

for the position of the telephone line jack and the external device jack.

Show Quick Links

Table of Contents

Troubleshooting