Checking The Ink Status With The Lcd On The Machine - Canon MX490 series Online Manual

Hide thumbs Also See for MX490 series:

Table of Contents

Checking the Ink Status with the LCD on the Machine

• The ink level detector is mounted on the machine to detect the remaining ink level. The machine

considers as ink is full when a new FINE cartridge is installed, and then starts to detect a remaining ink

level. If you install a used FINE cartridge, the indicated ink level of it may not be correct. In such case,

refer to the ink level information only as a guide.

• When remaining ink cautions or errors occur, the message will appear on the LCD to inform you of the

error. Take appropriate action according to the message.

A Message Is Displayed

1. Make sure that the power is turned on, then press the Setup button.

The Setup menu screen will appear.

LCD and Operation Panel

Remaining ink is shown in the area (A).

The ink is running low. Prepare a new ink cartridge.

• To print the model number of the FINE cartridge, select Ink information from Setup menu, then

select Print ink number.

• You can also check the ink status on the LCD when you press the COPY or FAX button. The

current remaining ink level will be displayed on the LCD for a few seconds.

• You can also check the ink status on the computer screen.

Checking the Ink Status from Your Computer

Downloaded from ManualsPrinter.com Manuals

button to select Ink information, then press the OK button.

button to select Remaining ink, then press the OK button.

Show Quick Links

Table of Contents