Table of Contents
Advertisement
When the enable or disable setting of protocols (ENABLE TCP/IP, ENABLE NetWare, and ENABLE EtherTalk) is
NOTE
changed, the new setting will be effective after resetting the printer. For resetting, follow the message by pressing
"OK", turning the printer off and then back on after waiting a few seconds.
Print Test Page
Printing a test page verifies that the printer operates properly. Also you can check the configuration
settings, built-in fonts etc. When printing is complete, the printer will exit the printer configuration
menu and return to online mode.
PRINT CONFIGURATION
PAGE
PRINT RESIDENT FONT LIST
PRINT DEMO PAGE
PRINT NIC PAGE
PRINT PCL SYMBOL SET
LIST
Initialize and/or Store Settings
Use these functions to initialize or store printer settings.
RESTORE FACTORY
DEFAULTS
STORE CURRENT
CONFIGURATION
RESTORE CONFIGURATION
RESET THE NIC
If this key is pressed, the printer will return to the online mode and print the
configuration list.
If this key is pressed, the printer will return to the online mode and print the
resident font list.
If this key is pressed, the printer will return to the online mode and print a
demonstration page.
If this key is pressed, the printer will return to the online mode and print the NIC
(Network Interface Card) configuration page. If an optional network interface
card (Print Server Card) is not installed, this function will not appear on the
touch panel.
If this key is pressed, the printer will return to the online mode and print the
PCL symbol set list.
When this key is pressed, a confirmation window will appear. If the "YES" key is
pressed, all the printer configuration settings will return to the factory default
settings.
When this key is pressed, a confirmation window will appear. If the "YES" key is
pressed, the current printer configuration settings will be stored in the printer's
nonvolatile memory.
When this key is pressed, a confirmation window will appear. If the "YES" key is
pressed, the printer configuration settings that have been stored in the printer's
nonvolatile memory with the "STORE CURRENT CONFIGURATION" function
will be recalled.
When this key is pressed, a confirmation window will appear. If the "YES"
key is pressed, the settings of the optional network interface card will
return to the factory default settings.
35
USING THE OPERATION PANEL
Advertisement
Table of Contents
Troubleshooting
