Table of Contents
Advertisement
D. Print Test Page
Printing a test page verifies that the printer operates properly. Also
you can check the configuration settings, built-in fonts etc. When
printing is complete, the printer will exit the printer configuration menu
and return to online mode.
PRINT
If this key is pressed, the printer will return
CONFIGURATION
to the online mode and print the
PAGE
configuration list.
PRINT RESIDENT
If this key is pressed, the printer will return
FONT LIST
to the online mode and print the resident
font list.
PRINT DEMO PAGE If this key is pressed, the printer will return
to the online mode and print a
demonstration page.
PRINT NIC PAGE
If this key is pressed, the printer will return
to the online mode and print the NIC
(Network Interface Card) configuration
page. If an optional network interface card
(Print Server Card) is not installed, this
function will not appear on the touch panel.
PRINT PCL
If this key is pressed, the printer will return
SYMBOL SET LIST
to the online mode and print the PCL
symbol set list.
E. Initialize and/or Store Settings
Use these functions to initialize or store printer settings.
RESTORE
When this key is pressed, a confirmation
FACTORY
window will appear. If the "YES" key is
DEFAULTS
pressed, all the printer configuration
settings will return to the factory default
settings.
STORE CURRENT
When this key is pressed, a confirmation
CONFIGURATION
window will appear. If the "YES" key is
pressed, the current printer configuration
settings will be stored in the printer's
nonvolatile memory.
RESTORE
When this key is pressed, a confirmation
CONFIGURATION
window will appear. If the "YES" key is
pressed, the printer configuration settings
that have been stored in the printer's
nonvolatile memory with the "STORE
CURRENT CONFIGURATION" function will
be recalled.
RESET THE NIC
When this key is pressed, a confirmation
window will appear. If the "YES" key is
pressed, the settings of the optional
network interface card will return to the
factory default settings.
NOTES: If configuration settings are protected using key operator
programs (Prohibit Changes to Printer Settings and Prohibit
Changes to Interface Settings), the settings cannot return
to the factory default setting and stored settings cannot be
recalled.
Use the key operator programs to cancel protection mode.
If the setting of functions of enabling protocols (ENABLE
TCP/IP, ENABLE NetWare, and ENABLE EtherTalk) is
changed by using the function "RESTORE FACTORY
DEFAULTS" or "RESTORE CONFIGURATION", the new
setting will be effective after resetting the printer. To reset
the printer, turn off the printer and then turn it on after a few
seconds.
The "Restore Factory Defaults" setting does not restore
network settings. To return the network settings to the fac-
tory default settings, use the "RESET THE NIC" function.
2. Key operator programs
(1) List
PROGRAM NAME
Printer Exposure Level
Memory Reserved for
Printer
Output Method When
Memory Is Full
Set the Number of
Confidential Print Jobs to
Be Stored
Enable Bypass-Tray Size
Detection
Give Priority to Print
Speed in Staple Mode
Prohibit Notice Page
Printing
Prohibit Rotated Output
Prohibit Bypass-Tray
Selection
Prohibit Auto Tray
Switching
Prohibit Test Page
Printing
Prohibit Changes to
Printer Settings
Prohibit Changes to
Interface Settings
Prohibit Changes to
Network Settings
Record Copy and Print
per Account
4 – 3
AR-PB2A
FUNCTION
Lightens or darkens printouts.
Specifies percentage of document
memory allocated to storage of printer
jobs.
(AR-250 (1GB hard disk model) only)
Specifies whether one set or multiple
sets will be printed when the printer
memory becomes full.
Specifies the maximum number of
confidential print jobs that can be
stored in the printer and the maximum
number of pages in a job.
Enables or disables paper size
detection for the bypass tray.
Specifies an image processing method
for printing with stapling.
(AR-505/507 only)
Specifies whether a notice page will be
printed when the printer memory
becomes full and divided printing is
performed.
Enables/disables rotation of print
image for printing onto A4R or 8-1/2" x
11"R paper.
Enables/disables bypass tray selection
in the 'Auto Tray Switching' mode.
Enables/disables automatic switching
between paper trays during printing
when paper runs out.
Enables/disables test page printing
from the printer configuration menu.
Prohibits modification of basic printer
settings in the printer configuration
menu.
Prohibits modification of interface
settings in the printer configuration
menu.
Prohibits modification of network
settings in the printer configuration
menu.
Enables or disables the printer auditing
mode, which controls access to printer.
Advertisement
Table of Contents
