Table of Contents
Advertisement
Web Page Feature
This copier/printer is equipped with web page features that allow some network-related functions
such as the network scanner function and the Status & Alert by E-mail function to be set and used
with a web browser. (An optional Network Scanner Expansion Kit AR-NS1 is required to use the
network scanner function.)
The web page feature includes the following three types.
1. Password Setting
Setting up the administrator's and user's passwords.
The administrator of this software can set the passwords (for administrator and user) to authorize
the access to the E-mail Setup Web page for the security of the settings on the page. If such a
security measure is not required, the Password Setting procedure can be skipped. This will leave
Web access settings open to all users.
2. E-mail Setup and Network Scanning Setup
Configuration of the network scanning system and status/alert by E-mail.
3. Scanning Destination Setup
Setting the default scanning parameters on the device to send the scanned image or data as
Destinations. (An optional Network Scanner Expansion Kit AR-NS1 is required for this setup.)
First, assign an IP address to the copier/printer. See Configuration from the Operation Panel,
Network Settings on page 34.
NOTE
The following characters cannot be input in the Web pages. The input is case-sensitive.
• Characters that cannot be input: < > & "
• Examples of improper input: <abc> <abc "abc" "abc abc"
Password Setting
The administrator should exclusively do the setting of the password of two levels: User and Admin
when setting up network scanning system security. A User password is required to create, change,
and delete destinations. An Admin Password lets you access to the same functions as the User
password but is also required to set system configuration settings such as:
•
Password Setup page
•
Setup Status & Alerts by E-mail pages
•
E-mail/Network Scanning Setup page
When you first install your network scanning system, both password functions are disabled. To set a
User and/or Admin password, the administrator needs to follow the steps below:
<
>
47
KEY OPERATOR'S GUIDE
Advertisement
Table of Contents
Troubleshooting
