Table of Contents
Advertisement
PRINTER TROUBLESHOOTING
Problem: Printed documents are too light or too dark.
Check:
Is the exposure control set properly?
Solution: Use key operator program "Printer Exposure Level" to adjust the exposure.
Problem: Print quality is unsatisfactory.
Check:
Was the wrong printer driver installed?
Solution: Uninstall the wrong printer driver, and install Sharp AR-PB2A printer driver. Refer to
Chapter 2.
Problem: Incorrect orientation
Check:
Is the orientation setting in the printer driver correct?
Solution: Correct the orientation in the printer driver.
Problem: Paper image is clipped or off the edge of paper.
Check:
Zoom printing?
Solution: Use the proper magnification ratio for printing.
Check:
Different paper size used?
Solution: From the AR-PB2A printer driver, select the paper size to be the same as the original
document, and make sure that the printer has the correct paper in the tray selected.
Check:
Different orientation used?
Solution: From the AR-PB2A printer driver, select the orientation to be the same as the original
document, and make sure that the printer has the correct paper orientation in the tray
selected.
Problem: Black pages
Check:
Is color image data printed?
Solution: Color image may be printed in black.
Check:
Are the black and white areas reversed?
Solution: Cancel the negative image printing feature in the printer driver.
Problem: Image loss along edges
Check:
Is the image loss outside the print area?
Solution: Check the print area information. (page 64)
60
Advertisement
Table of Contents
Troubleshooting
