Table of Contents
Advertisement
Understanding Phone Configuration Files
Phone Configuration Files" chapter in Cisco Unified Communications Manager Security Guide. A phone
requests a configuration file whenever it resets and registers with Cisco Unified Communications
Manager.
A phone accesses a default configuration file named XmlDefault.cnf.xml from the TFTP server when
the following conditions exist:
You have enabled auto-registration in Cisco Unified Communications Manager
•
The phone has not been added to the Cisco Unified Communications Manager Database
•
The phone is registering for the first time
•
If auto registration is not enabled and the phone has not been added to the Cisco Unified
Communications Manager database, the phone registration request will be rejected. In this case, the
phone will reset and attempt to register repeatedly.
If the phone has registered before, the phone will access the configuration file named
SEPmac_address.cnf.xml, where mac_address is the MAC address of the phone.
The TFTP server generates these SIP configuration files:
SIP IP Phone:
•
–
–
–
•
Dial Plan—<dialplan>.xml
•
Softkey Template—<softkey_template>.xml
The filenames are derived from the MAC Address and Description fields in the Phone Configuration
window of Cisco Unified Communications Manager Administration. The MAC address uniquely
identifies the phone. For more information refer to the Cisco Unified Communications Manager
Administration Guide.
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 7.0
2-6
For unsigned and unencrypted files—SEP<mac>.cnf.xml
For signed files—SEP<mac>.cnf.xml.sgn
For signed and encrypted files—SEP<mac>.cnf.xml.enc.sgn
Chapter 2
Preparing to Install the Cisco Unified IP Phone on Your Network
OL-15483-01
Advertisement
Table of Contents
Troubleshooting
