Table of Contents
Advertisement
Configuring Wideband Codec
Use a text editor to edit the List.xml file. See the
Step 4
page 6-4
Step 5
Save your modifications and close the List.xml file.
Note
To cache the new List.xml file, stop and start the TFTP service by using Cisco Unified Communications
Step 6
Manager Serviceability or disable and re-enable the Enable Caching of Constant and Bin Files at Startup
TFTP service parameter (located in the Advanced Service Parameters).
Configuring Wideband Codec
If Cisco Unified Communications Manager has been configured to use G.722 (G.722 is enabled by
default for the Cisco Unified IP Phone 7962G and 7942G) and if the far endpoint supports G.722, the
call connects using the G.722 codec in place of G.711. This situation occurs regardless of whether the
user has enabled a wideband headset or wideband handset, but if either the headset or handset is enabled,
the user may notice greater audio sensitivity during the call. Greater sensitivity means improved audio
clarity but also means that more background noise can be heard by the far endpoint—noise such as
rustling papers or nearby conversations. Even without a wideband headset or handset, some users may
prefer the additional sensitivity of G.722. Other users may be distracted by the additional sensitivity of
G.722.
Two parameters in Cisco Unified Communications Manager Administration affect whether wideband is
supported for this Cisco Unified Communications Manager server and/or a specific phone:
•
•
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 7.0
6-6
for the location of this file, formatting requirements, and a sample file.
When you upgrade Cisco Unified Communications Manager, a default List.xml file will replace
your customized List.xml file. After you customize the List.xml file, make a copy of the file and
store it in another location. After upgrading Cisco Unified Communications Manager, replace
the default List.xml file with your stored copy.
Advertise G.722 Codec—From Cisco Unified Communications Manager Administration, choose
System > Enterprise Parameters. The default value of this enterprise parameter is True, which
means that all Cisco Unified IP Phone Models 7942G, 7962G, 7945G, 7965G, and 7975G that are
registered to this Cisco Unified Communications Manager will advertise G.722 to Cisco Unified
Communications Manager. If each endpoint in the attempted call supports G.722 in its capabilities set,
Cisco Unified Communications Manager will choose that codec for the call.
Advertise G.722 Codec—From Cisco Unified Communications Manager Administration, choose
Device > Phone. The default value of this product-specific parameter is to use the value specified
in the enterprise parameter. If you want to override this on a per-phone basis, choose Enabled or
Disabled in the Advertise G.722 Codec parameter on the Product Specific Configuration area of the
Phone Configuration window.
Chapter 6
Customizing the Cisco Unified IP Phone
"List.xml File Format Requirements" section on
OL-15483-01
Advertisement
Table of Contents
Troubleshooting
