Radius-Server Source-Port - Cisco ASR 9000 Series Command Reference Manual
Aggregation services router broadband network gateway
Hide thumbs
Also See for ASR 9000 Series:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
radius-server source-port
radius-server source-port
To configure the NAS to use a total of 50 ports as the source ports for sending out RADIUS requests, use the
radius-server source-port command in the Global Configuration mode. To disable the Radius server
source-port, use the no form of this command.
radius-server source-port extended
no radius-server source-port extended
Syntax Description
extended
Command Default
None
Command Modes
Global Configuration mode
Command History
Release
Release 4.2.0
Usage Guidelines
Having 200 source ports allows up to 256*200 authentication and accounting requests to be outstanding at
one time. During peak call volume, typically when a router first boots or when an interface flaps, the extra
source ports allow sessions to recover more quickly on large-scale aggregation platforms.
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
aaa
Examples
This is an example of configuring the radius-server source-port command in theGlobal Configuration mode:
RP/0/RSP0/CPU0:router(config)#radius-server source-port extended
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
48
Specifies that the source-port can be extended to 50.
Modification
This command was introduced.
Operations
read, write
BNG AAA Commands
Advertisement
Chapters
Table of Contents
