Dynamic-Template - Cisco ASR 9000 Series Command Reference Manual
Aggregation services router broadband network gateway
Hide thumbs
Also See for ASR 9000 Series:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
dynamic-template
dynamic-template
To group a set of configuration items that can be applied to a group of subscribers and to enter the
dynamic-template configuration mode, use the dynamic-template command in the Global Configuration
mode. To disable this feature and exit the dynamic-template configuration mode, use the no form of this
command.
dynamic-template type {ipsubscriber name| ppp name| service name}
no dynamic-template
Syntax Description
type
name
ipsubscriber
ppp
service
Command Default
None
Command Modes
Global Configuration mode
Command History
Release
Release 4.2.0
Usage Guidelines
Use the dynamic-template command to enter dynamic template configuration mode.
Task ID
Task ID
config-services
Examples
This is an example of configuring the dynamic-template command in the Global Configuration mode:
RP/0/RSP0/CPU0:router# configure
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
232
Specifies the type of templates, for example, ppp or ipsubscriber or service.
Specifies the name of the dynamic template type.
Specifies the ipsubscriber dynamic template type.
Specifies the ppp dynamic template type.
Specifies the service dynamic template type.
Modification
This command was introduced.
Operation
read, write
Dynamic Template Commands
Advertisement
Chapters
Table of Contents
