Cisco Asr 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference - Cisco ASR 9000 Series Command Reference Manual
Aggregation services router broadband network gateway
Hide thumbs
Also See for ASR 9000 Series:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
Excessive Punt Flow Trap Commands
interface-path-id
information
location
Command Default
None
Command Modes
EXEC mode
Command History
Release
Release 4.3.0
Usage Guidelines
No specific guidelines impact the use of this command.
Task ID
Task ID
lpts
basic-services
Either a physical interface instance or a virtual interface instance as follows:
• Physical interface instance. Naming notation is rack/slot/module/port and a slash
between values is required as part of the notation.
◦ rack: Chassis number of the rack.
◦ slot: Physical slot number of the modular services card or line card.
◦ module: Module number. A physical layer interface module (PLIM) is always
0.
◦ port: Physical port number of the interface.
Note
In references to a Management Ethernet interface located on a route
processor card, the physical slot number is alphanumeric (RSP0 ) and the
module is CPU0. Example: interface MgmtEth0/RSP0 /CPU0/0.
• Virtual interface instance. Number range varies depending on interface type.
For more information about the syntax for the router, use the question mark (?) online
help function.
Displays the Excessive Punt Flow Trap feature information.
Displays bad actors on a line card.
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
show lpts punt excessive-flow-trap
Modification
This command was introduced.
Operation
read
read, write
5.2.x
261
Advertisement
Chapters
Table of Contents
