Dhcp Ipv6 (Bng) - Cisco ASR 9000 Series Command Reference Manual

Aggregation services router broadband network gateway

Hide thumbs Also See for ASR 9000 Series:

Table of Contents

dhcp ipv6 (BNG)

To enable Dynamic Host Configuration Protocol (DHCP) for IPv6 and to enter DHCP IPv6 configuration

mode, use the dhcp ipv6 command in Global Configuration mode. To disable the DHCP for IPv6, use the no

form of this command.

no dhcp ipv6

Syntax Description

This command has no keywords or arguments.

Command Modes

Global Configuration mode

Command History

Release 4.1.0

Release 4.3.0

Usage Guidelines

Use the dhcp ipv6 command to enter DHCP IPv6 configuration mode.

This example shows how to enable DHCP for IPv6:

RP/0/RSP0/CPU0:router(config)# dhcp ipv6

RP/0/RSP0/CPU0:router(config-dhcpv6)#

Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,

Release 5.2.x

Modification

This command was introduced.

This command was supported for

BNG DHCP Commands

Table of Contents