Interface (Dhcp-Bng) - Cisco ASR 9000 Series Command Reference Manual
Aggregation services router broadband network gateway
Hide thumbs
Also See for ASR 9000 Series:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
interface (DHCP-BNG)
interface (DHCP-BNG)
To enable Dynamic Host Configuration Protocol (DHCP) for IPv4 or IPv6 on an interface, use the interface
command in the appropriate configuration mode. To disable DHCPv4 or DHCPv6 on an interface, use the
no form of the command.
interface type interface-path-id {base| proxy | relay| server| snoop}profile profile-name
no interface type interface-path-id {base| proxy | relay| server| snoop}[profile profile-name]
Syntax Description
type
interface-path-id
server
relay
snoop
proxy
base
profile profile-name
Command Default
None
Command Modes
DHCP IPv6 configuration
DHCP IPv4 configuration
Command History
Release
Release 4.1.0
Release 4.3.0
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
162
Interface type. For more information, use the question mark (?) online help
function.
Physical interface or virtual interface.
Use the show interfaces command to see a list of all interfaces
Note
currently configured on the router.
For more information about the syntax for the router, use the question mark
(?) online help function.
Attaches a server profile for the specified interface.
Attaches a relay profile for the specified interface.
Attaches a snoop profile for the specified interface.
Attaches the proxy profile to an interface.
Attaches a base profile for the specified interface.
Specifies the profile name.
BNG DHCP Commands
Modification
This command was introduced.
The support for IPv6 was added in
BNG.
Advertisement
Chapters
Table of Contents
