Show Ipv6 Traffic (Bng) - Cisco ASR 9000 Series Command Reference Manual

Aggregation services router broadband network gateway

Hide thumbs Also See for ASR 9000 Series:

Table of Contents

show ipv6 traffic (BNG)

To display the IPv6 traffic statistics, use the show traffic command in the EXEC mode.

show ipv6 traffic [brief]

Syntax Description

Command Default

Command Modes

Command History

Release 3.7.2

Release 4.3.0

Usage Guidelines

The show ipv6 traffic command provides output similar to the show ipv4 traffic command, except that it is

IPv6-specific.

This is the sample output of the show ipv6 traffic command:

RP/0/RSP0/CPU0:router# show ipv6 traffic

IPv6 statistics:

Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,

Release 5.2.x

(Optional) Displays only IPv6 and Internet Control Message Protocol version 6

(ICMPv6) traffic statistics.

0 total, 0 local destination

0 source-routed, 0 truncated

0 format errors, 0 hop count exceeded

0 bad header, 0 unknown option, 0 bad source

0 unknown protocol

0 fragments, 0 total reassembled

0 reassembly timeouts, 0 reassembly failures

0 reassembly max drop

sanity address check drops

0 generated, 0 forwarded

Modification

This command was introduced.

This command was supported for BNG.

IPv4 and IPv6 Commands

Table of Contents