Relay Information Check (Bng) - Cisco ASR 9000 Series Command Reference Manual
Aggregation services router broadband network gateway
Hide thumbs
Also See for ASR 9000 Series:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
BNG DHCP Commands
relay information check (BNG)
To configure a Dynamic Host Configuration Protocol (DHCP) IPv4 Relay to validate the relay agent information
option in forwarded BOOTREPLY messages, use the relay information check command in DHCP IPv4
relay profile configuration submode. To disable this feature, use the no form of this command.
relay information check
no relay information check
Syntax Description
This command has no keywords or arguments.
Command Default
DHCP validates the relay agent information option.
Command Modes
DHCP IPv4 relay profile configuration
Command History
Release
Release 3.7.2
Release 4.2.0
Usage Guidelines
No specific guidelines impact the use of this command.
Task ID
Task ID
ip-services
basic-services
Examples
This example shows how to use the relay information check command:
RP/0/RSP0/CPU0:router#config
RP/0/RSP0/CPU0:router(config)# dhcp ipv4
RP/0/RSP0/CPU0:router(config-dhcpv4)# profile client relay
RP/0/RSP0/CPU0:router(config-dhcpv4-relay-profile)# relay information check
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
Modification
This command was introduced.
This command was supported for BNG.
Operations
read, write
read, write
relay information check (BNG)
5.2.x
185
Advertisement
Chapters
Table of Contents
