Radius-Server Ipv4 Dscp - Cisco ASR 9000 Series Command Reference Manual

Aggregation services router broadband network gateway

Hide thumbs Also See for ASR 9000 Series:

Table of Contents

BNG AAA Commands

radius-server ipv4 dscp

To mark the dscp bit for the ipv4 packets, use the radius-server ipv4 dscp command in the Global

Configuration mode. To disable the Radius server IPv4 dscp, use the no form of this command.

radius-server ipv4 dscp value

no radius-server ipv4 dscp value

Syntax Description

Command Default

Command Modes

Global Configuration mode

Command History

Release 4.2.0

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task

IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator

for assistance.

This is an example of configuring the radius-server ipv4 dscp command in the Global Configuration mode:

RP/0/RSP0/CPU0:router(config)#radius-server ipv4 dscp 34

Specifies the differentiated services codepoint value. The value ranges from 1 to

Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release

Modification

This command was introduced.

radius-server ipv4 dscp

Table of Contents