Pado Delay Circuit-Id - Cisco ASR 9000 Series Command Reference Manual
Aggregation services router broadband network gateway
Hide thumbs
Also See for ASR 9000 Series:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
pado delay circuit-id
pado delay circuit-id
To set a delay for a PPPoE Active Discovery Offer (PADO) message for a particular PPPoE BBA-Group,
based on the Circuit-ID received in PPPoE Active Discovery Initiator (PADI) message, use the pado delay
circuit-id command in PPPoE BBA-Group configuration mode. To disable the PADO delay configuration
based on the Circuit-ID, use the no form of this command.
pado delay circuit-id {delay | {string | contains} string delay}
no pado delay circuit-id {delay | {string | contains} string delay}
Syntax Description
delay
string
contains
string
Command Default
None
Command Modes
PPPoE BBA-Group configuration
Command History
Release
Release 4.3.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
444
Delay value for PADO message, in milliseconds,
based on the Circuit-ID.
The range is from 0 to 10000.
Delays the PADO message, when the Circuit-ID string
received in PADI message matches the configured
string.
Delays the PADO message, when the Circuit-ID
received in PADI message contains the configured
string.
String received in PADI message, that needs to be
exactly matching the Circuit-ID (when used along
with string keyword) or the string received in PADI
message, that needs to be contained within the
Circuit-ID (when used along with the contains
keyword).
Modification
This command was introduced.
PPPoE Commands
Advertisement
Chapters
Table of Contents
