Frame Threshold - Cisco ASR 9000 Series Command Reference Manual
Aggregation services router
Hide thumbs
Also See for ASR 9000 Series:
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages) ,
- Configuration manuallines (694 pages)
Table of Contents
Advertisement
frame threshold
frame threshold
To configure the thresholds that triggers an Ethernet OAM frame error event, use the frame threshold
command in Ethernet OAM link monitor or interface Ethernet OAM link monitor configuration mode. To
return the threshold to the default value, use the no form of this command.
frame threshold low threshold [high threshold]
no frame threshold low threshold [high threshold]
Syntax Description
low threshold
high threshold
Command Default
The default low threshold is 1.
Command Modes
Ethernet OAM link monitor configuration (config-eoam-lm)
Interface Ethernet OAM link monitor configuration (config-if-eoam-lm)
Command History
Release
Release 3.9.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
When the low threshold is passed, a frame error event notification is generated and transmitted to the OAM
peer. Additionally, any registered higher level OAM protocols, such as Connectivity Fault Management
(CFM), are also notified. When the high threshold is passed, the configured high threshold action is performed
in addition to the low threshold actions. The high threshold is optional and is configurable only in conjunction
with the low threshold.
Task ID
Task ID
ethernet-services
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
256
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
Low threshold, in symbols, that triggers a frame error event. The range is 0 to
12000000.
(Optional) High threshold, in symbols, that triggers a frame error event. The range
is 0 range is 0 to 12000000. The high threshold value can be configured only in
conjunction with the low threshold value.
Modification
This command was introduced.
Operations
read, write
Hide quick links:
Advertisement
Table of Contents
