Lacp Churn Logging - Cisco ASR 9000 Series Command Reference Manual

Aggregation services router

Hide thumbs Also See for ASR 9000 Series:

Table of Contents

lacp churn logging

To configure the parameters for LACP churn detection, enter the lacp churn loggin command in interface

configuration mode. To return to the default, use the no form of the command.

lacp churn logging{actor| both| partner}

no lacp churn logging{actor| both| partner}

Syntax Description

Command Default

The parameters for churn detection are not configured.

Command Modes

Interface configuration (config-if)

Command History

Release 5.1.3

The following example shows how to configure the LACP churn detection on a partner router:

RP/0/RSP0/CPU0:router# configure terminal

RP/0/RSP0/CPU0:router(config)# interface Bundle-Ether 100

RP/0/RSP0/CPU0:router(config-if)# lacp churn logging partner

The following example shows how to configure the LACP churn detection on both actor and partner routers:

RP/0/RSP0/CPU0:router# configure terminal

RP/0/RSP0/CPU0:router(config)# interface Bundle-Ether 100

RP/0/RSP0/CPU0:router(config-if)# lacp churn logging both

Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,

Release 5.3.x

Link Bundling Commands on the Cisco ASR 9000 Series Router

Logs the churn events of the actor, which is the router under consideration,

Logs the churn events of both the actor and the partner.

Logs the churn events of the partner router only

Modification

This command was introduced.

Show Quick Links

Table of Contents