Ssrp Location - Cisco ASR 9000 Series Command Reference Manual

Aggregation services router

Hide thumbs Also See for ASR 9000 Series:

Table of Contents

PPP Commands onthe Cisco ASR 9000 Series Router

ssrp location

To specify the node on which to create a Session State Redundancy Protocol (SSRP) group and enter the

SSRP node configuration mode, use the ssrp location command in global configuration mode.

ssrp location node_id

Syntax Description

Command Default

No default behavior or values

Command Modes

Global configuration

Command History

Release 3.9.0

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task

IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator

for assistance.

The location specifies the card on which an SSRP group is created.

This example shows how to create an SSRP group on a specified node for use by any interface on the card:

RP/0/RSP0/CPU0:router# config

RP/0/RSP0/CPU0:router(config)# ssrp location 0/1/cpu0

RP/0/RSP0/CPU0:router(config-ssrp-node)#

Specifies the full qualified path of a specific node in the format rack/slot/module.

Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,

Modification

This command was introduced.

ssrp location

Release 5.3.x

Show Quick Links

Table of Contents