Show Controllers Wanphy - Cisco ASR 9000 Series Command Reference Manual
Aggregation services router
Hide thumbs
Also See for ASR 9000 Series:
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages) ,
- Configuration manuallines (694 pages)
Table of Contents
Advertisement
10-Gigabit Ethernet WAN PHY Controller Commandson the Cisco ASR 9000 Series Router
show controllers wanphy
To display alarms, registers, and module information for a 10-Gigabit Ethernet WAN PHY controller, use
the show controllers wanphy command in EXEC mode.
show controller wanphy interface-id [alarms| all]
Syntax Description
interface-id
alarms
all
Command Default
No default behavior or values
Command Modes
EXEC
Command History
Release
Release 3.9.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Physical interface instance. Naming notation is rack/slot/module/port and a slash between
values is required as part of the notation.
• rack: Chassis number of the rack.
• slot: Physical slot number of the line card.
• module: Module number. A physical layer interface module (PLIM) is always 0.
Shared port adapters (SPAs) are referenced by their subslot number.
• port: Physical port number of the interface.
For more information about the syntax for the router, use the question mark (?) online help
function.
Displays information about any alarms that are detected by the specified 10-Gigabit Ethernet
WAN PHY controller.
Displays registers, alarms, and module information for the specified 10-Gigabit Ethernet
WAN PHY controller.
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Modification
This command was introduced.
show controllers wanphy
Release 5.3.x
1105
Hide quick links:
Advertisement
Table of Contents
