Show Iphc Profile - Cisco ASR 9000 Series Command Reference Manual

Aggregation services router

Hide thumbs Also See for ASR 9000 Series:

Table of Contents

show iphc profile

To display the configuration information of an IP header compression (IPHC) profile, use the show iphc

profile command in EXEC mode.

show iphc profile {profile-name| all} [detail]

Syntax Description

profile-name

Command Default

No default behavior or values

Command Modes

Command History

Release 4.0.0

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task

IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator

for assistance.

The following examples show how to display information about an IPHC profile:

RP/0/RSP0/CPU0:router# show iphc profile ietf-test1

Tue Aug 10 06:53:19.711 PDT

IPHC Profile: ietf-test1

Compressing : TCP

Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,

Release 5.3.x

Text name of the IPHC profile for which to display information.

Displays information for all profiles on the router.

(Optional) Displays the interfaces to which the profile is attached.

NON-TCP (RTP)

: TCP fixed at 1 NON-TCP fixed at 10

: NON-TCP every 60 seconds or 100 packets

Serial Interface Commands on the Cisco ASR 9000 Series Router

Modification

This command was introduced.

Show Quick Links

Table of Contents