Cisco ASR 9000 Series Command Reference Manual page 905

Aggregation services router

Hide thumbs Also See for ASR 9000 Series:

Table of Contents

SONET Controller Commands on the Cisco ASR 9000 Series Router

delay clear, on page 859

delay trigger, on page 861

overhead (SONET path), on page 878

report (SONET path), on page 888

scrambling disable (SONET path), on

threshold (SONET path), on page 925

uneq-shut (SONET path), on page 929

Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,

Configures the amount of time before a STS path delay trigger alarm

Configures a time value for the STS path delay trigger.

Sets the SONET path overhead bytes in the frame header to a specific

standards requirement or to ensure interoperability with equipment

from another vendor.

Configures whether or not selected SONET alarms are logged to the

console for a SONET path controller.

Disables payload scrambling on a SONET path.

Sets the bit error rate (BER) threshold values of the specified alarms

for a SONET path.

Enables automatic insertion of P-UNEQ code (0x00) in the sent

SONET path overhead C2 byte.

path (SONET)

Release 5.3.x

Show Quick Links

Table of Contents