Link Bundling Commands on the Cisco ASR 9000 Series Router
show lacp bundle
To display detailed information about Link Aggregation Control Protocol (LACP) ports and their peers, enter
the show lacp bundle command in EXEC mode.
show lacp bundle {Bundle-Ether} bundle-id
Command Default
No default behavior or values
Command Modes
EXEC mode
Command History
Release
Release 3.7.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
bundle
Examples
The following example shows how to display LACP information for a specific Ethernet Bundle:
RP/0/RSP0/CPU0:router# show lacp bundle Bundle-Ether 1
Flags: A - Device is in Active mode. P - Device is in Passive mode.
State: 0 - Port is Not Aggregatable. 1 - Port is Out Of Sync with peer.
Bundle-Ether1
B/W (Kbps)
----------
Port
------------
Gi0/0/2/0
PEER
S - Device sends PDUs at slow rate. F - Device sends PDUs at fast rate.
D - Port is using default values for partner information
E - Information about partner has expired
2 - Port is In Sync with peer. 3 - Port is Collecting.
4 - Port is Collecting and Distributing.
MAC address
--------------
0
0800.453a.651d
State
Flags
-----
-----
1
ASDE
0
PSD
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Modification
This command was introduced.
Operations
read
Minimum active
Maximum active
Links
B/W (Kbps)
Links
-----
----------
-----
1
620000
32
Port ID
Key
--------------
------
0x8000, 0x0001
0x0001
0xffff, 0x0000
0x0000
show lacp bundle
System-ID
-------------------------
0x8000, 08-00-45-3a-65-01
0xffff, 00-00-00-00-00-00
Release 5.3.x
645