Cisco Asr 9000 Series Aggregation Services Router Interface And Hardware Component Command Reference - Cisco ASR 9000 Series Command Reference Manual
Aggregation services router
Hide thumbs
Also See for ASR 9000 Series:
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages) ,
- Configuration manuallines (694 pages)
Table of Contents
Advertisement
ethernet sla on-demand operation type cfm-loopback probe
schedule now
schedule at hh:mm:ss
day
month
year
schedule in number {seconds | minutes | hours}
for duration {seconds | minutes | hours}
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
236
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
(Optional) Specifies that the probe
begins as soon as you enter the
command. This is the default.
(Optional) Specifies a specific time
at which to start the probe in
24-hour notation.
(Optional) Number in the range 1
to 31 of the day of the month on
which to start the probe.
(Optional) Name of the month (full
word in English) in which to start
the probe.
(Optional) Year (fully specified as
4 digits) in which to start the probe.
(Optional) Specifies a relative time,
as a number of seconds, minutes or
hours from the current time, at
which to start the probe, where
number is in the following ranges:
• 1 to 3600 seconds
• 1 to 1440 minutes
• 1 to 24 hours
(Optional) Specifies the length of
the probe as a number of seconds,
minutes, or hours, where number
is in the following ranges:
• 1 to 3600 seconds
• 1 to 1440 minutes
• 1 to 24 hours
The duration should not
Note
exceed the interval
specified by the repeat
every option.
Hide quick links:
Advertisement
Table of Contents
