Cisco Asr 9000 Series Aggregation Services Router Interface And Hardware Component Command Reference - Cisco ASR 9000 Series Command Reference Manual

Aggregation services router

Hide thumbs Also See for ASR 9000 Series:

Table of Contents

action dying-gasp

The following example shows how to configure that no action is performed on the interface when a dying-gasp

notification is received.

RP/0/RSP0/CPU0:router# configure

RP/0/RSP0/CPU0:router(config)# ethernet oam profile Profile_1

RP/0/RSP0/CPU0:router(config-eoam)# action dying-gasp disable

The following example shows how to configure that the interface is put into the error-disable state when a

dying-gasp notification is received.

RP/0/RSP0/CPU0:router# configure

RP/0/RSP0/CPU0:router(config)# ethernet oam profile Profile_1

RP/0/RSP0/CPU0:router(config-eoam)# action dying-gasp error-disable-interface

The following example shows how to configure that a syslog entry is created when a dying-gasp notification

is received. This configuration overrides the interface Ethernet OAM profile.

RP/0/RSP0/CPU0:router# configure

RP/0/RSP0/CPU0:router(config)# interface gigabitethernet 0/1/0/0

RP/0/RSP0/CPU0:router(config-if)# ethernet oam

RP/0/RSP0/CPU0:router(config-if-eoam)# action dying-gasp log

Related Commands

ethernet oam profile, on page 215

ethernet oam, on page 212

profile (EOAM), on page 299

Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,

Release 5.3.x

Ethernet OAM Commands on the Cisco ASR 9000 Series Router

Creates an EOAM profile and enters EOAM configuration mode.

Enables Ethernet Link OAM, with default values, on an interface

and enter interface Ethernet OAM configuration mode.

Attaches an Ethernet OAM profile to an interface.

Show Quick Links

Table of Contents