Ppp Max-Failure - Cisco ASR 9000 Series Command Reference Manual

Aggregation services router

Hide thumbs Also See for ASR 9000 Series:

Table of Contents

ppp max-failure

To configure the maximum number of consecutive Configure Negative Acknowledgments (CONFNAKs) to

permit before terminating a negotiation, use the ppp max-failure command in an appropriate configuration

mode. To disable the maximum number of CONFNAKs and return to the default, use the no form of this

ppp max-failure retries

no ppp max-failure

Syntax Description

Command Default

Command Modes

Interface configuration

Command History

Release 3.9.0

Release 4.2.0

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task

IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator

for assistance.

The ppp max-failure command specifies that no more than three CONFNAKs are permitted before terminating

the negotiation:

RP/0/RSP0/CPU0:router#

Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,

Release 5.3.x

Maximum number of CONFNAKs to permit before terminating a negotiation. Range

is from 2 to 10. Default is 5.

Modification

This command was introduced.

This command was supported in the dynamic template configuration

mode for BNG.

PPP Commands onthe Cisco ASR 9000 Series Router

Show Quick Links

Table of Contents