show aps
Working ch 1 (192.168.1.1):Enabled
APS Group 49:
Protect ch 0 (SONET0_2_0_0):Disabled
Working ch 1 (SONET0_2_0_1):Enabled
APS Group 6:
PGP:protocol version: native 2 adopted 2
PGP:Authentication "cisco", hello timeout 1 sec, hold timeout 3 sec
Protect ch 0 (192.168.3.2 - auto):Disabled
Working ch 1 (SONET6_0):Enabled
Table 51: show aps Field Descriptions
Field
APS Group
Protect ch
Working ch
Related Commands
Command
show aps agents, on page 895
show aps group, on page 897
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
894
SONET framing, SONET signalling, bidirectional, non-revertive
Rx K1:0x00 (No Request - Null)
K2:0x05 (bridging Null, 1+1, bidirectional)
Tx K1:0x00 (No Request - Null)
K2:0x05 (bridging Null, 1+1, bidirectional)
SONET framing, SONET signalling, unidirectional, non-revertive
Rx K1:0x00 (No Request - Null)
K2:0x00 (bridging Null, 1+1, non-aps)
Tx K1:0x00 (No Request - Null)
K2:0x04 (bridging Null, 1+1, unidirectional)
SONET framing, unidirectional
Rx K1:0x00 (No Request - Null)
K2:0x00 (bridging Null, 1+1, non-aps)
Tx K1:0x00 (No Request - Null)
K2:0x00 (bridging Null, 1+1, non-aps)
Rx K1:0x00 (No Request - Null)
K2:0x00 (bridging Null, 1+1, non-aps)
Tx K1:0x00 (No Request - Null)
K2:0x00 (bridging Null, 1+1, non-aps)
SONET Controller Commands on the Cisco ASR 9000 Series Router
Description
Assigned number of the APS group. Range is from
1 through 255.
Number and address of the protect channel interface.
Number and address of the working channel interface.
Description
Displays the status of the APS WP distributed communication
subsystem.
Displays information about the APS groups.