Mlacp Switchover Maximize - Cisco ASR 9000 Series Command Reference Manual

Aggregation services router

Hide thumbs Also See for ASR 9000 Series:

Table of Contents

mlacp switchover maximize

To set the maximum number of links or bandwidth in the bundle, use the mlacp switchover maximizecommand

in the bundle interface configuration mode.

mlacp switchover maximize { links | bandwidth }[threshold value]

Syntax Description

Command Default

No default behavior or value.

Command Modes

Bundle interface configuration.

Command History

Release 4.0.0

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes the proper task

IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA

administrator.

This command allows switchovers to take place such that the active device is the one with most bandwidth

or maximum links in the bundle.

Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,

Release 5.3.x

Compares the operational links, with respect to the total number of links.

Compares the available bandwidth, with respect to the total bandwidth.

Sets the threshold value to switch to the peer, if its has more links/ bandwidth available.

• When used with the links keyword, sets the minimum number of links, below

which the device switches to the peer if more links are available. Range is 1-64.

• When used with the bandwidth keyword, sets the minimum bandwidth (in kbps),

below which the device switches to the peer if more bandwidth is available.

Range is 1-4294967295.

Modification

This command was introduced.

Global Interface Commandsonthe Cisco ASR 9000 Series Router

Show Quick Links

Table of Contents