Clear Ethernet Udld Statistics - Cisco ASR 9000 Series Command Reference Manual

Aggregation services router

Hide thumbs Also See for ASR 9000 Series:

Table of Contents

clear ethernet udld statistics

To remove the statistics of state machine transitions and packets exchanged on an interface running UDLD

protocol, use the clear ethernet udld statistics command in the ethernet interface configuration mode.

clear ethernet udld statistics[interface type |unaccounted-drops |all]

Syntax Description

interfacetype

unaccounted-drops

Command Default

Command Modes

Ethernet Interface Configuration

Command History

Release 4.2.0

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task

IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator

for assistance.

ethernet-services

This example shows how to run the clear ethernet udld statistics command for an interface:

RP/0/RSP0/CPU0:router

Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,

Release 5.3.x

(Optional) Clears information about the specified interface type. If an interface

is specified, only the interface-specific counters are shown and not the node

(Optional) Clears information for only the node counters.

(Optional) Clears all the udld statistics.

Modification

This command was introduced.

clear ethernet udld statistics interface GigabitEthernet 0/1/0/1

Ethernet OAM Commands on the Cisco ASR 9000 Series Router

Show Quick Links

Table of Contents