Cisco Asr 9000 Series Aggregation Services Router Interface And Hardware Component Command Reference - Cisco ASR 9000 Series Command Reference Manual
Aggregation services router
Hide thumbs
Also See for ASR 9000 Series:
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages) ,
- Configuration manuallines (694 pages)
Table of Contents
Advertisement
action high-threshold
Examples
The following example shows how to configure that a syslog entry is created on the interface when a high
threshold is exceeded.
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# ethernet oam profile Profile_1
RP/0/RSP0/CPU0:router(config-eoam)# action high-threshold log
The following example shows how to configure that the interface is put into the error-disable state when a
high threshold is exceeded.
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# ethernet oam profile Profile_1
RP/0/RSP0/CPU0:router(config-eoam)# action high-threshold error-disable-interface
The following example shows how to configure that no action is taken when a high threshold is exceeded.
This configuration overrides the Ethernet OAM profile configuration.
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# interface gigabitethernet 0/1/0/0
RP/0/RSP0/CPU0:router(config-if)# ethernet oam
RP/0/RSP0/CPU0:router(config-if-eoam)# action high-threshold disable
Related Commands
Command
ethernet oam profile, on page 215
ethernet oam, on page 212
profile (EOAM), on page 299
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
144
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
Description
Creates an EOAM profile and enters EOAM configuration mode.
Enables Ethernet Link OAM, with default values, on an interface
and enter interface Ethernet OAM configuration mode.
Attaches an Ethernet OAM profile to an interface.
Hide quick links:
Advertisement
Table of Contents
